HARBOR INNOVATIONS

PRODUCT PRICES AND GENERAL INFO SHEET

Home Page
HEATER CONTROL VALVE - RETROFIT
PRODUCT DETAILS & BASIC INSTALLATION
CURRENT PRODUCT PRICES AND INFORMATION
.
Ordering / Shipping - Policies & Procedures (PLEASE READ BEFORE SHOPPING!)
SHOP ONLINE - use our Store Site and Secure Payment with PayPal
.
DETAILED INSTALLATION GUIDE
HEATER SYSTEM TECH TIPS
.
Refer a Friend
Contact Us
.
CAR/TRUCK CLUB - SPECIAL PROGRAM
CAR/TRUCK CLUB PROMO log in only
CAR/TRUCK CLUB ORDERING PROCEDURE
.

PRODUCT INFORMATION

HEATER CONTROL VALVE -Retrofit 

(Manual cable controlled type)

This Valve is a Replacement for metal original equipment valves ......also can replace vacuum operated valves by adding a heater cable on/under dash for manual operation.

VALVEMODELA.jpg

VALVEMODELB.jpg.

.

.

.

.

.

.F100_INSTALLED_VALVE.jpg

.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
.
.
.
.
.
.
.
OLDVALVE.jpg
.
.
THIS IS WHAT YOU ARE REPLACING ---------------------------à
.
YIKES!!   CORROSION!  AND ..... IT’S TOUGH TO OPEN AND CLOSE THAT VALVE (The lever broke on this one trying to free it)          YOU DON"T WANT THIS! This may look familiar when you pull your hoses and inspect your current metal heater control valve.     

CORROSION INSIDE YOUR VALVE MEANS DANGER FROM EROSION IN YOUR  HEATER CORE, RADIATOR, WATER PUMP, VALVES, SENDERS  &  OTHER PARTS.

.

RETROFIT THAT OLD HEATER CONTROL VALVE -- Get these features:

> ABS Plastic Body & Nylon Internals: manufactured by an Auto Industry OEM Manufacturer.

> Mounting Bracket: enables 2 Valve positions for clearances of 1/2" or 2 1/4" from firewall or inner fender to work around wiring or solenoids on your vehicle.

> Mounting Bracket: 16 ga steel, powder paint coat semi-gloss black and rated at handling heat up to 400 Degrees without blistering.

> Dimensions: Valve is 5" long (between pipe ends) Mount is 3 1/2"w 3 1/2"h x 2"deep

THE BENEFITS: SMOOTH AND EASY OPERATING OF YOUR CABLE'S PULL & RETURN and VALVE WOULD NOT RUST OR CORRODE IN YOUR COOLING SYSTEM

Buy Direct from our Website  (current prices) :

VALVE A- $54.00 or .......With Install Kit $68.00

VALVE B- $51.00 or .......With Install Kit $65.00

Install Kit $16.00 if purchased separately has 90 deg 5/8" hose elbow and 5/8" connector (see installed one above).   We also have a Kit with 5/8" X 1/2" adapting connector or a Kit with 5/8" to 3/4" adapting connector for inlet heater hoses that you may need instead, these separate Kits are priced at $17.00 each.

Add Shipping/Handling USA or International

Sales Tax only California Customer International Tariff/Duty/Tax at Customs Port of Entry                    Prices effective 1/1/09 subject to change

Pay with Credit Cards through PayPal secure site, Money Order or Personal Check.

(Check requires 5-7 banking days to clear) ALSO we will ship COD (COD fees apply)

HARBOR INNOVATIONS * * * USA * 
.
.
(Thank you for using E-Mail to contact us; it's a great way to communicate these days)
.
Phone: (760)-956-3598   Fax: (760) 956-3598  
Skype:  wes_smith3013

Powered by Register.com